Hitachi 18-Gauge NT50AE2 Brad 5/8-Inch to 2-Inch Nailer
$45.71
Selective Actuation allows the user to select bump fire or contact fire modes with the simple flip of a switch 🔄
At only 2.2 lbs, this finish nailer is lightweight & well-balanced making it easy to use all day long 💪
Elastomer grip adds comfort and prevents slippage ✋
Tool-less, easy to clear nose for quick and simple nail extraction should a nail jam during use 🔧
Depth of drive dial allows the user to easily adjust the drive depth for a professional finish 🎯
Specifications
- Gauge: 18
- Fastener Length: 5/8-Inch to 2-Inch
- Weight: 2.2 lbs
Benefits
The Hitachi 18-Gauge NT50AE2 Brad Nailer is designed for comfort and efficiency. Its lightweight design means you can use it for extended periods without fatigue. The elastomer grip provides a secure hold, ensuring you can work safely without slippage. The selective actuation feature gives you control over the firing mode, allowing for precise work depending on the task at hand. The tool-less jam clearing feature means you can quickly get back to work without hassle.
Usage Instructions
To use the Hitachi Brad Nailer, first, select your desired firing mode using the selective actuation switch. Load the correct gauge nails into the magazine, ensuring they are seated properly. Adjust the depth of drive dial for your specific project needs. Hold the nailer firmly and press the tip against the material to begin nailing. For bump fire mode, you can quickly fire nails in succession while maintaining pressure.
Care Guidelines
Keep your Hitachi nailer clean and free of debris after each use. Regularly check for any jams and clear them using the tool-less nose feature. Store the nailer in a dry place to prevent rust and damage. Always inspect the tool before use to ensure it’s in good working condition. By following these care guidelines, your nailer will last longer and perform better!